Toolhead Parts
Nozzle¶
Comes with V6 hardened steel nozzles.
Hotend¶
Hotend Kit¶
This is the hotend for KLP1 Gen2 with the CHT heater.
Buy from
Silicone Sock¶
Buy from
Thermistor¶
Glass bead thermistor for no-screen V1 version
Buy from
Ceramic Heater¶
Glass bead thermistor
Buy from
Extruder¶
Extruder Kit¶
Includes a metal hotend kit with CHC heating element, 5015 bearing fan with 9000rpm, THR mainboard with built-in ADXL345 acceleration sensor, high sensitivity, and accuracy proximity sensor, and dual gear extruder.
Buy from
Gears¶
Extruder has a custom machined aluminum case but the gears and lever used are from a clone BMG extruder.
Motor¶
NEMA14 36 high temperature stepper motor
Buy from
Extruder Board¶
Custom board similar to MKS THR boards connected to the mainboard via USB. Marked "Kingroon KP THR V1.0".
Buy from
Inductive ABL Probe¶
J8A3-2/Z/BX NPN NO 2mm 5V inductive probe connected to the THR board with a PH2.0 3-pin plug.
Buy from
Part Cooling Fan¶
Part cooling fan is a non-standard 5015 fan with a wide exhaust and smaller screw posts. It connects to the THR board with a PH2.0 2-pin connector.
Buy from
A standard 5015 fan will not fit inside the toolhead due to the screw mounts on the cover
You will need to grind down the screw posts and print a modified fan vent to fit.
Hotend v1.0¶
Heat Break v1.0¶
Custom PTFE lined heat break.
- diameter: 7mm
- diameter at narrow part: 6mm
- length of cold end insert: 16.65mm
Looks like it's also used on Anycubic Kobra hot end.
Buy from
Heater Block v1.0¶
Common E3D V5 style aluminium heat block.
Heater Cartridge v1.0¶
6x15 24V50W heater cartridge connected to terminals on the THR board.
Buy from
Thermistor v1.0¶
Glass bead thermistor
Buy from